Railroad Tie steps

Go to draw >> miscellaneous >> stairs

Using the stairs tool

Now before you draw the stairs. Set your stair and tread width. Then select the line type you want to use.

Setting the stair width and tread width

Then simply draw your stairs. In this example we used a 3' wide path and each step is 2' on center.

Using different line tools to design steps.

This technique could be used for creating other stairs as well for your design.

• Related Articles

• Software not registering manual file registration steps

  There could be many possible issues from installation problems, firewalls, permissions, etc. In almost all cases they can be resolved, but for some odd ones. Follow the steps below. The registration file is attached to this email.  1. Download and ...

• Drawing Steps in planner

  An easy technique to draw steps is to use the Stairs tool. Go to DRAW >> MISCELLANEOUS >> STAIRS. This tool will allow you to change the line type (Line, Polyline, Semi-circle, Spline Curve or Fitted Curve) In the Edit Bar, set the tread width and ...

• Creating Steps from a Wall Pattern

  Here's a trick you can try when you need steps but do not have an image of steps to work with. The technique uses a wall image with a capstone and a slight shadow cast by the capstone. You will find many of these in the Content Explorer >> Paver Tab ...

• Windows 10 Sleep Settings

  The software can take about an hour or more to install. You want to make sure the computer does not fall sleep while installing. Click on windows start button and then on the settings icon. Windows Setting Icon Click on System. Windows SettingsClick ...